Category: Engine Performance > Fuel System

Email A Friend      Print This Page

Click to enlarge

10 Channel Peak & Hold Injector Driver

AEM

Eliminate Low Response, High Impedance “Saturated” Injectors!

AEM is proud to introduce its external Peak & Hold Injector Driver module! This unit allows ECU’s that have a saturated injector drive circuit to trigger low impedance injectors with a true 4/1 Peak & Hold injector drive circuit.

AEM’s Peak & Hold Injector Driver contains 10 independent injector drive channels. Each channel supplies full battery voltage to a fuel injector for rapid current rise, in order to produce positive injector opening. When load current reaches 4.1A (amps), the injector driver reduces the load current to 1.1A and operates as a constant current source. This condition holds the injector open, and reduces system power dissipation. If the current fails to reach 4.1A within 5mS, the driver module automatically reduces the load current to 1.1A.

Installation is straightforward. Users simply hook the injector trigger wires from an ECU to the module, and then hook the output wires from the module to your injectors. Any number of channels can be used from one to 10.

Average Rating: Rate it:  Poor Excellent Add to Favorites

For more information on this product, visit AEM's website.